directly proportional to the substituted current.
indirectly proportional to the substituted current.
1 Volt per 1 mW of power.
is connected to the DIFFERENTIAL VOLTMETER jack?
10 megohms on all ranges
10 megohms on 1 to 10 mW ranges 100 megohms or greater on lower
Which switch on the 8402B calibrator provides a method of determining
oscillator non-oscillation states of the 431C Power Meter?
What effect would A1VR2, in the precision current generator, have on the
operation of the calibrator, if it is defective?
No fixed reference voltage
Inoperative substitute mode
What type output is generated from the Darlington-combination transistors
High voltage gain
Low current gain
High current gain
In the power supply circuit what effect will diode A1CR6, if open, have on
No reference -30 volts
A1Q2 will saturate
A1Q2 will cutoff resulting in -15 volt reference
With the 431C power meter range switch set the null, a stable meter
indication greater than zero represents
10 kHz oscillation.
1 kHz oscillation.