114 One of the columns in foldout-1 lists
the amount by which the ______________ or thick-
ness of each block in a series will vary from
the length or ________________ of the next smal-
ler or larger block. The title used for this
list of differences is "___________________ ."
133 The proper selection of blocks for a
given measurements requires an understanding
of relationships between numbered decimal
places and the dimensions of blocks in a spe-
cific series. The next frames will relate
________________ places to the ______________ of
blocks in a specific series.
153 The remaining significant digit in the
dimension 0.2000 inch is _____________________ .
173 In foldout-2, the adjustment of the
distance between the anvil and the spindle to
0.__________ inch is a __________ application of
192 We have identified two of the dimen-
blocks for their measurement accuracy. We
have explained the ________ and _________ appli-
establish a specific dimension or check the
dimensional accuracy of a ________________ and a
___________ ____________ .
211 You can see that the adjacent side
(adj) is the distance between the centers of
the stacks of _____________________________ .