In addition to being square in shape, the
Hoke block has a hole in its center. You recog-
nize the ________ block by its ________ in the
center and _________ shape. You recognize the
____________ block by its ____________ shape.
The materials chosen and the processes used
in the manufacture of gage blocks produce the
features which justify the use of gage blocks as
measurement standards. This means that materials
and processes produce ____________ which justify
You should avoid using cleaning materials
other than a ________ or ________ ________
to protect the mating surfaces of the blocks
Even the heat of the hands may be transfer-
the gage blocks with your ________ because the
______ of the hands will be ______________ to the
Look at Figure 6 below. The first word of
the instruction is the key to the illustration.
Figure 6 shows how you _______ the gaging ______
__________ in the first step of the second
Overlap of gaging surfaces.