MM3671, Lesson 1
Item 11. This item concerns loaded railcars only.
Item 12. This item concerns loaded railcars only.
Item 13. This item on the inspection report reminds you to note unsafe conditions that are not listed on the report
form. In figure 1-8, for example, scrap lumber and used strapping is scattered in the area; this condition is
entered and checked UNSAT in Item 13. If the condition is corrected on the spot, note that in the Remarks
Figure 1-8. Scrap Lumber Making It Unsafe to Work in and Around Railcars.
Item 14. If you pass the railcar, check SAT. If not, check UNSAT and note why in Remarks.
Comments. Enter explanations such as, "All unsatisfactory items have been corrected."
Date and Signature. Evaluate your inspection results (figure 1-9). Decide from the entries you made on the
inspection report, including the remarks and comments, whether or not the car meets the standards for loading
munitions. If all unsatisfactory conditions have been corrected, the car may be released for loading. Enter the
date that you completed your inspection. Your signature as ammunition inspector on the form will allow the car to
be used or will reject it.