36
division
37
Look at the thimble position at B in fold-
scale
out-19. You can see that the edge of the thimble
0.025
has been moved from the _____ index on the ______
4 (four)
scale a total of _______ whole ____________ or
0.100 (1/10)
about ________ inch.
42
spindle
43
The scales at C in foldout-19 are inter-
preted in the same manner as those at B. The
anvil
micrometer ______ and _________ moved a total of
____________whole divisions.
0.206
48
49
Return to foldout-2. The scales of the
micrometer are being calibrated with ___________
_____________ as illustrated.
No Response Required
54
direct
55
As far as the gage blocks in foldout-2 are
concerned, the adjustment of the calipers in
foldout-20 is an __________ application.
60
0.001
61
When we add the sleeve scale reading to the
thimble scale reading, we find that the calipers
in foldout-20 have been adjusted for a dimension
which is slightly greater than ___________ inch.
66
0.0005
67
When you add the __________ ,_________ , and
______________ scale readings in foldout-21, you
sleeve
know that the calipers in foldout-20 have been
adjusted for a measurement dimension of _________
thimble
inch.
64
Previous Page
