Amplifier Test Set (AN/TAM 5).
The Amplifier Test Set is used to isolate a fault in the
postamplifier assembly to a single replaceable subassembly, to gain-
balance the Video buffers, and to aline the Night Sight eyepiece
reticle assembly. When testing the night vision sight, use the test
set in conjunction with the night vision test set AN/TAM-3A.
Major
controls of the amplifier test set are video channel select, gain
select, and signal select.
The mode of operation is determined by
the manual/auto, stop/start, and reset switches. The amplifier test
set contains one circuit card and a power module. A part of the test
set is the boresight alinement fixture.
The boresight alinement
fixture is used to perform alinement of the night sight eyepiece
reticle assembly.
Figure 3-3.
Amplifier Test Set and Boresight Alinement Fixture.
53
MM4812
Previous Page
