LESSON 2
AN/UXC-7 INSTALLATION/PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)
TASK
AN/UXC-7 Installation/PMCS.
CONDITIONS
1.
PERFORMANCE. Given two each AN/UXC-7, handtools, TM 11-5815-615-23 extract, TM
11-5815-615-10 extract, vehicle mounting adapter, selected vehicle, interconnecting cables appropriate
for mode/type of operation as described in Table 3, interface equipment appropriate for mode/type of
operation described in Table 4, a predetermined site, using realistic tactical scenario narrations and
discussion, and monitored by a qualified OJT supervisor.
2.
PERFORMANCE-ORIENTED. Given Lesson 2 material, TM 11-5815-615-10, TM 11-5815-
615-23, pencil, paper, and without supervision.
STANDARDS
1.
PERFORMANCE. Correctly install the AN/UXC-7 at a fixed site and in a vehicle, performing
interconnection procedures for one of the options listed in TM 11-5815-615-10. Perform PMCS within
20 minutes IAW TM 11-5815-615-10 and TM 11-5815-615-23. Perform installation procedures for
Mode A or Mode B self-test operation within 20 minutes IAW TM 11-5815-615-10. Performance will
be under simulated desert tactical scenario environmental conditions, and without error within one of
two attempts.
2.
PERFORMANCE-ORIENTED. Demonstrate competency of the task skills and knowledge by
correctly responding to 70 percent of the multiple-choice test covering installation operational self-test
procedures and PMCS.
REFERENCES
TM 11-5815-615-10 and TM 11-5815-615-23 extracts.
30
Previous Page
