instruction manual was used as the prime data source in compiling these instructions. The
equipment being calibrated will be referred to as the "TI" (test instrument) throughout
this procedures.
(1) Model Variations. Variations among models are described in text.
(2) Time and Technique. The time required for this calibration is approximately 8
hours, using the dc and physical technique.
b. Calibration Description.
TI parameters and performance specifications which pertain to this calibration are listed
in table 4.
c. Equipment Required
Table 5 identifies the specific equipment used in this calibration procedure. This
equipment is issued with the secondary reference calibration standards set and is to be
used in performing this procedure. Alternate items may be used by the calibrating activity
Previous Page
