MM3671, Lesson 3
Transportation Control No. You do not need to double check this. It was assigned by the form's originator.
Destination. This block was filled in by the form's originator; you do not need to double check it.
Load Storage (L/S) Group. This is found in the last column of table 4-1 to the right of Detonators, Class A
Explosives. In this case, the entry is 4. See figure 3-5.
Flash Point.
The entry should be
N/A as
ammunition does not require this.
Certification. You saw earlier in the lesson that this shipment was for cargo aircraft only. This block should be
checked and the words Passenger Aircraft should be lined out.
Check this block and enter the paragraph 5-15 as shown in Table 4-1 and the subparagraph of TM 38-250 that
deals with the items being shipped. Paragraph 5-14, a, (4), (b) describes the packaging and marking for Class A
explosive detonators. The rest of the certification block is not filled in, and you do not need to double check it.
Address of Shipper. You do not need to double check this.
Typed Name, Signature, and Date. You do not need to double check this except to be sure the form has been
signed.
Air Shipment Report-Identification Section
Refer to figures 3-2 and 3-3 as you go through the identification section of the report in figure 3-9 item by item.
Installation. Enter the name of the shipper from the block Address of Shipper on DD Form 1387-2.
Date. Enter the date you perform the inspection.
Transportation Control Number (TCN). Enter the 17-digit Transportation Control Number from DD Form 1387-2.
Destination. Enter the Destination from DD Form 1387-2.
Item Nomenclature. Enter the item nomenclature (Block X) from DD Form 1387-1. Also enter the NSN from the
Stock for Part Number block of DD 1348-1 and to it add the Department of Transportation Identification Code
(DODIC) from block W of the same form.
NEW Per PKG. Not used.
NEW Per PLT. Enter the NEW from the Consignment Gross Weight block on DD Form 1387-2.
Gross Weight. Enter the gross weight in pounds from the Consignment Gross Weight block on DD Form 1387-2.
DOT Shipping Name. From DD Form 1348-1, enter the Freight Classification Nomenclature (block U).
36