MM3679
INSPECTING THE TOW GM
Remove the lead wire seals from the container.
Use a sallee closer tool to lift the bent wires that
close the cover of the shipping and storage
container. Cut the steel straps with a pair of
metal band cutting shears. Be careful removing
the steel straps. The ends and edges are sharp.
Open the container and remove the three foam
saddles. Next, take out the platen and pads.
Remove the TOW GM from the container and
place it on a workbench. Brace it so that it
cannot roll.
The TOW GM may be packed in a barrier bag.
If it is, remove the bag and throw it away. The
bag is not replaced.
11
Previous Page
