The first frame is located at the tope of page 5 and is numbered 2.
When you have filled the blank(s) with the response you have chosen, compare
your response with the correct response, which is located at the top of page
7.
Read the second frame and make the proper response.
Compare this
response to the correct response on page 9. This procedure of response and
response-comparison is repeated for each succeeding frame in this volume.
The blanks requiring a one word response look like this: ___________ .
The blanks requiring a two-word response look like this: _________________ .
Normally, there is a blank for each word in a correct response. See note
below.
This subcourse is organized as follows:
Page
Credit
Hours
Lesson 1
Gage Block Materials and Construction (Part I)..... 3
2
Lesson 1
Gage Block Use and Care (Part II) ................ 33
Lesson 1
Gage Block Selection (Part III)
................. 25
Lesson 1
Gage Block Applications (Part IV) ................ 38
Lesson 2
Optical Flat Construction (Part I) ............... 45
2
Lesson 2
Optical Flat Applications (Part II) ............. .59
Lesson 3
Micrometer Construction (Part I) ................. 63
2
Lesson 3
Micrometer Applications (Part II) ................ 72
Lesson 4
Calibration of Gage Blocks ....................... 75
1
Note:
Lesson 4 is written in the standard format because of the
lesson content.
iv
Previous Page
