110 The reference dimension of a gage
block is the distance between its gaging sur-
faces. This means that the distance called
No Response Required
the length or thickness in Figure 9 is called
the ___________________ __________________ in
Figure 10 below.
129
four (4)
length (dimensions)
one (1)
four (4)
one (1)
Figure 10. Gage block reference dimensions.
(Turn to page 6)
148 0.103 (2 X 0.001
149 If we add the sum of 4 series incre-
+ 0.101 inch) ments to the value of the first block in this
second series, the total value is ____________
third
inch. This value is the dimension of the
___________ block in the series.
168
direct
169 When gage blocks are used to calibrate
other dimensional measuring equipment, they
are used as a dimensional ________________ .
Their use as a dimensional standard is a
______________________ application.
187
visual
188 When the gaging ________________ barely
gage
_________the ________ block of the gage block
spindle
combination, the visual gage scale indicator
touch (contact or
should be adjusted to zero, as shown in Figure
engage)
12.
207
L
sine
bar
length
triangle
Figure 12.
Centering the visual gage scale.
(Turn to page 6)
4
Previous Page
