111
dimensions
112 You can see that the 81-block set of
gage blocks shown in foldout-1 is divided into
length
four groups or ____________________ of blocks.
thickness
130
1
inch
131 You should know the following:
+2
inches
Gage block sets are divided into groups
+3
inches
called series.
+4
inches
An 81-block set has 4 series of 8, 49, 19,
10
inches
and 4 blocks.
The blocks in a series will increase from
the smallest to the largest by specific
amounts called the series increments.
(No response required.)
150
0.120
151 Now that you know how and why the 20th
block was selected to eliminate the ____________
20th
significant ____________ in the dimension 0.3200
inch, let us complete the selection.
170
171 Gage blocks are dimensional ______________
whose accuracies are used to set machines and
No Response Required
tools for specific dimensional _______________
or in the calibration of dimensional measure-
ment equipment.
189
direct
190 When you compare the dimension of the
piece being measured with the ________________
application
inch dimension established by the gage block
in foldout-3, you are making an ___________ app-
lication of gage blocks.
208
standards
209 Our primary concern in the illustration
sine
B in foldout-6 is the application of our dimen-
bar
sional standard, the ____________ ____________ .
triangle
8
Previous Page
