4
lapped
5
Linear reference standards of measure-
ment must be highly accurate. Because gage
polished
blocks are constructed with a high degree of
precision and accuracy, they are used as a
two
_______________ _______________of______________ .
23
parallel
24
One of the main reasons the _____________
type block was made square was to assure that
its two surfaces would be flat and _____________.
41
coefficients
42
The gage block features discussed thus
far are
variations
____________ _________________
____________ _________________
__________ ___________ _____________
59
chamois
60
Do not drop gage blocks or handle them
soft
roughly. If you ______________ the blocks or
cleaning
___________ them ____________ , the damage they
tissue
receive may destroy the measurement accuracy
gage block cleaner
of the blocks.
grain
alcohol
79
wringing
80
When you _____________ gage blocks, their
flat polished surfaces adhere (stick to each
other) with a force of several hundred pounds
per square inch.
98
overlap
99
The combined instructions in Figures 6
gaging
and 7 explain how you __________ the ___________
pressing
surfaces and then increase the overlap of the
sliding
gaging ________________ by _________________ the
blocks together ______________ and ____________
one surface over the other with a straight
forward motion.
11
Previous Page
