3.
To perform a 6-minute transmission for field wire or telephone system operation, what position
must the ANLG/ANLG(V) DIGITAL and HI RES LO SP HI SP LO RES switches be placed.
a. ANLG/HI SP LO RES.
b. (V) DIGITAL/HI RES LO SP.
c. ANLG (V) /HI RES LO SP.
d. ANLG/HI RES LO SP.
4.
To abort and erase a message in receive memory in order to receive a higher priority message,
what function must be performed (if the RCV push button has not been pressed) ?
a. Press the RCV push button momentarily then release it.
b. Press the SEND push button momentarily.
c. Set the GRAY B/W switch to B/W.
d. Set MODE/DATA FORMAT switch to MODE A then back to MODE B.
5.
If the ERROR light flashes during a receive operation, it could be an indication that
a. the message being received is of high priority.
b. the memory has reached full capacity.
c. communication is lost or the transmit station aborted the message.
d. the LDF internal circuitry is operating properly.
6.
When operating in Mode B, the message in image memory can be retrieved any time by
performing what operation?
a. Position the start and stop margin lamps and press the LOAD/UNLOAD switch.
b. Load an output copy on the drum and press the SELF-TEST switch.
c. Press the PAPER RELEASE lever firmly, insert output copyset into the drum clamp as far as
possible, then release lever.
d. None of the above.
72
Previous Page
