19
Hoke
20
Identify and describe the two types of gage
hole
blocks commonly used as indicated below.
square
Type title:
___Hoke___
_Johannson_
Johansson
Identifying
__________
___________
rectangular
shapes:
__________
___________
__________
___________
__________
___________
(CONTINUED ON PAGE 3)
37
features
38
The first of the features which make gage
blocks acceptable as measurement standards is
measurement
flat surfaces in steel. Steel blocks must be
machined to near perfection to assure that their
standards
surfaces are _____________ .
(CONTINUED ON PAGE 3)
54
chamois
55
You should use a gage block cleaner to re-
soft
move the rust proof grease from gage blocks.
cleaning
Your supply room will maintain a supply of cha-
tissue
mois, ____ cleaning ____ , and gage block clea-
ner so that you can ________ rust proof ________
from gage blocks.
(CONTINUED ON PAGE 3)
74
hands
75
If you hold a 1-inch block tightly for
several minutes, the physical dimensions may in-
heat
crease as much as 40 millionths of an inch.
The change in the physical ______________ of the
transferred
block will also ________ the measurement ________
of the block.
(CONTINUED ON PAGE 3).
94
overlap
95
In the first wringing procedure we used the
expression mating ______________ . In the second
surfaces
wringing procedure we will use the expression
gaging surfaces.
wringing
(CONTINUED ON PAGE 3)
41
Previous Page
