LESSON 1
ANSWER KEY AND FEEDBACK
Item
Correct Answer and Feedback
1.
A. Appendix 43. Using the NSN given, Appendix 0* directs the use of Appendix 43* for unitization.
The views and notes on Appendix 43 provide the types and quantities of material required for one
pallet. This information may be expanded to any number of pallets. (Page A-50)
2.
A. 38 5/8 inches. The isometric view shown on Page 2 of Appendix 43* shows that the height of the
pallet is 38 5/8 inches. (Page A-53)
3.
D. Three. Three load straps are required. (Page A-53)
4.
D. Ten. Cartridges, 81mm, are packed three per wooden box, 30 boxes per pallet. (Page A-52)
5.
D. 1,040 feet. Three load straps (each 15 foot 4 inches long) and four tiedown straps (each 14 foot 6
inches long) are required per pallet. There are ten pallets. (Page A-53)
6.
B. To provide a bearing surface for the unitizing straps. (Page 1-20)
7.
D. Four. (Page A-8)
8.
C. Seven. (Page A-14)
9.
C. Rear Blocking Assembly B. (Page A-15)
10.
B. Rear void is greater than 1 1/2 inches but less than 9 inches. (Page A-15)
MM0176
1-28
Previous Page
