Figure 36.
Time base and grid line location.
p. Place
the
ART
AZ-OPERATE-ART
EL
switch
S401
to
ART
AZ
(Figure 33).
q. Adjust the EXPANSION AZ control R1510 (Figure 25) to position
the time base sweep 1/8 inch below the center grid line (Figure 24).
r. Disconnect the multimeter and place the ART AZ-OPERATE-ART EL
switch to OPERATE (Figure 32).
s. Rotate the grid line face plate to the position where the grid
lines are vertical (Figure 6).
34
Previous Page
