6.
Determines the amount of time that events are sampled.
a.
Level
b.
Sample Rate
c.
Function
d.
Gate Time
7.
Selects voltage at which triggering occurs.
a.
Level
b.
Sample Rate
c.
Function
d.
Gate Time
8.
Select the correct statement.
a.
The number of digits displayed changes for each setting of the
Gate Time switch.
b.
When the Display Position switch is rotated clockwise, the
decimal point shifts to the right.
c.
The annunciator changes with frequency when the Display Position
switch is in any position other than Auto.
d.
Underflow occurs when the most significant digit is too far to
the left.
9.
An illuminated ARM light indicates that
a.
Channel
A
is
ready for triggering.
b.
Channel
B
is
ready for triggering.
c.
Channel
A
is
not triggering.
d.
Channel
B
is
not triggering.
10.
For which of the following conditions will lamp test not occur?
a.
When the Power switch is placed to standby
b.
When the Reset button is pushed
c.
When switching between detent positions of the
Gate
Time,
Function, and Display Position switches
d.
When the counter has gone into excessive gate time
11.
What is the measurement time when a frequency of 1 MHz is being
measured?
a.
1 us
b.
1 ms
c.
1.01 ms
d.
1.001 ms
32
Previous Page
