c. 50 mV 10 mV.
d. 25 mV 5 mV.
6. The sensitivity of the beam on the Voland J5000S is adjusted to provide an output of
___________ for a 1 gram standard weight on the pan.
a. 9 V 1 V
b. 90 V 100 mV
c. 90 mV 10 mV
d. 900 mV 100 mV
7. During the measurement processes of zeroing, ranging, and measuring; the output of the
voltage/frequency converter is measured for _______ before being stored in the appropriate
registers.
a. 10 seconds
b. 1.0 seconds
c. 0.2 seconds
d. 2.0 seconds
8. During the weighing process, the weight pan must be released and arrested each time a weight
knob is increased or deceased except for the
a. 1 kg knob.
b. 10 g and 1 g knobs.
c. 1 g knob.
d. 100 g and 10 g knobs.
9. When loading weights on a balance, care should be taken to handle the weights only with
a. tongs or tweezers.
b. rubber gloves.
c. cheese cloth.
d. clean, dry hands.
10. Using Table 2 in lesson 1, what is the gram equivalent of 4 pounds 15 3/4 oz troy weight?
a. 2260.854 44 grams
b. 2260.874 44 grams
c. 1982.866 95 grams
d. 1982.846 95 grams
11. When using the digital display balance, the (-OVER) light comes on; what does this
condition indicate?
a. balance shows the TI to be lighter than the display
Previous Page
