NOTE:
All
switches
are
illustrated
in
figure
14
unless
otherwise
indicated.
(a) Place the 208 V main switches in the ON position.
(b) Place the main blackout circuit switch in the OFF position.
(c) Place the service receptacle and blackout switches (figure 15)
in the OFF position.
(d) Depress 110 V circuit breaker switches as required.
(e) Operate individual ceiling light switches as desired.
(f) When operation is completed, depress 110 V circuit breakers as
required and place the 208 V main switch in the OFF position.
(2) Blackout conditions.
(a) Raise all window blackout panels.
(b) Place the 208 V main switches in the ON position.
(c) Place the main blackout circuit switch in the ON position.
(d) Place the service receptacle and blackout switches (Figure 15)
in the ON position.
(e) Depress 110 V circuit breaker switches as required.
(f) Operate individual ceiling light switches as desired.
NOTE:
If power is desired at any service receptacle when the doors are
opened, place the individual service receptacle blackout switch in the OFF
position.
(g) When operation is completed, depress 110 V circuit breaker as
required and place the 208 V main switches in the OFF position.
125
Previous Page
