MM4618, Lesson 1
3. Which of the TAMMS forms listed below are used to control operator and equipment usage?
a. DA Form 2407 and DD Form 314.
b. DD Form 1970 and DA Form 2401.
c. DA Form 2404 and DA Form 2408-1.
d. DA Form 2408-14 and DD Form 314.
4. What are the three major purposes of DA Form 2407?
a. To report services and lubrications, record firings, and record life cycle maintenance.
b. To report the date of manufacture, local purchases, and combat losses of equipment.
c. To request or report an MWO, request support maintenance, and report warranty claims.
d. To defer maintenance, schedule maintenance, and report maintenance on equipment.
5. Which form is used to accumulate NMCS/NMCM time and, therefore, shows the number of days a vehicle
was not available for use during any one month?
a. DD Form 314 (Preventive Maintenance Schedule and Record).
b. DA Form 2408-9 (Equipment Control Record).
c. DA Form 2407 (Maintenance Request).
d. DA Form 2408-20 (Oil Analysis Log).
Recheck your answers to the review exercises. When you are satisfied that you have answered every
question to the best of your ability, check your answers against the exercise solutions. If you missed one or more
questions, you should retake the entire lesson, paying particular attention to the area in which your answers were
incorrect.
25
Previous Page
