CRC Maintenance and Functions

(1) Any repairs made incident to calibration of TMDE identified by

system code H05 must be reported to Commander, US Army Armament Materiel

Readiness Command, ATTN: DRSAR-MAY-C, Dover, NJ 07801. Mail a duplicate DA

Form 2416 with appropriate remarks within 48 hours of the repair. Reports

will be submitted by the activity performing the repair.

Appropriate

remarks as a minimum will include-

(a) Quantitative calibration data (actual value read) prior to repair

or adjustment.

(b) Quantitative calibration data (actual value setting) following

repair or adjustment incident to calibration.

(c) The number, latest change number, and date of the calibration

technical bulletin used to perform the calibration.

(d) The technical bulletin paragraph(s) in which the need for repair

or adjustment of the TMDE being calibrated was identified.

(2) TMDE organic to nuclear activities, which is received by the

calibration activity in an unserviceable condition and red-tagged, must also

be reported using the procedure given above.

NOTE: Those procedures are not applicable to instrumentation used to provide

3.

CRC MAINTENANCE AND FUNCTIONS.

a. Provide direct and general support (DS/GS) maintenance for TMDE-GP.

b. Provide organizational, DS, and GS

maintenance

for

organic

measurement standards and associated equipment.

c. Maintain operational readiness floats for selected

measurement

standards and TMDE-GP, and operate a direct exchange program.

d. Directs operations of the various elements within the CRC and

assures compliance with AR 750-25, TB 43-180, TB 750-25, and other

appropriate DA publications.

e. Directs the TMDE calibration and repair support operations and

insures that service is provided within the assigned mission support area.

f. Effects production, planning, and control of the workload for the

AACL, Base TMDE Support team, and ATSTs.

202