11.
What is the maximum percentage of distortion permitted for the HP652A
a.
0.5
b.
1.0
c.
2.0
12.
The parameter with which one can cross-check a number of standards
with a single reference is a
a.
DC voltage.
b.
AC voltage.
c.
distortion.
13.
Table 1 lists some basic standards that required
periodic
cross-
checks. Which standard in table 3 is the reference?
a.
DC voltmeter
b.
DC voltage
c.
AC precision supply
14.
What is the definition of a cross-checking?
a.
Cross-checking is the comparison of an unknown accuracy against a
known accuracy.
b.
Cross-checking determines which component of a standard requires
repair.
c.
Cross-checking is the process of comparing certified instruments
to verify that no significant departure from assigned tolerances
occurred.
15.
Which DA form(s) are used during a cross-check?
a.
DA 2417, U.S.
ARMY REJECTED INSTRUMENT
b.
DA 2416, Calibration Data Card
c.
DA Label 80, CALIBRATED INSTRUMENT Label
191
Previous Page
