e. Place the METER SELECT switch S3201 to the +300 V position and
observe the meter (Figure 25).
Figure 25.
PP-1670/FPN-33 +300 V meter indication.
f. Adjust the +300 V ADJ control (R3223) until the meter reads in the
green zone (Figure 25).
4.
You have completed the adjustments of the output voltage of power
supply PP-1670/FPN-33.
In doing so, you have ensured that the proper
operating voltages are supplied to the components in cabinet, electrical
equipment CY-2830/FPN-40.
5.
Now, use this checklist
to
review
the
location
of
the
following
components and controls.
Receiver-transmitter group OA-2667/FPN-40 (Figure 5).
Power supply PP-1670/FPN-33 (Figure 21).
Meter M3201 (Figure 22).
+105 V ADJ R3267 (Figure 21).
-210 V ADJ R3245 (Figure 21).
+300 V ADJ R3223 (Figure 21).
METER SELECT switch S3201 (Figure 21).
27
Previous Page
